產品中心
您的位置:網站首頁 > 產品中心 > 電子式互感器
子式互感器接口標準
名稱:電子式互感器接口標準
型號:OEMU-JH8合并器
OEMU-JH8電子式互感器的合并器
Combiner of OEMU-JH8 electronic transformer
一、概述(Description)
OEMU-JH8合并器是數字式光電電流電壓互感器的合并單元。本產品可以分為三種型號:A、66kV及以上光電型電子式互感器用合并器;B、35kV及以下電子式互感器用合并器;C、35kV及以下的電磁式互感器用合并器。合并器除了可以接收并處理來自多個采集器的數字信號外,還可以接收并處理電磁式互感器提供的電壓、電流模擬量。合并器提供同步信號輸入通道,可以接收電站同步信號以同步連接的各采集器。
OEMU-JH8 combiner is the incorporated unit of digital photoelectric current and voltage transformer. The product can be divided into three types:A、The combiner that is used in the photoelectric transformer and rated voltage above 66kV;B、The combiner that is used in the electronic transformer and rated voltage below 35kV;C、The combiner that is used in the electromagnetic transformer and rated voltage below 35kV.The combiner can not only receive and handle the digital signal from many collectors but also the analog variable of current and voltage provided by the electromagnetic transformer. The combiner provides the input channel of synchronous signal and receives the synchronous signal from the power station and all collectors that are connected synchronously.
合并器還可以通過輔助CPU和擴展入開出直接提供保護、測量等功能,同時通過光纖以太網接口給監控、測量等裝置提供數據。
The combiner can provide the direct protection function and measurement through the auxiliary CPU and expansion and provide data to monitoring and measuring device through the optical fiber and the Ethernet interface at the same time.
三、結構簡介(Construction)
1、合并器是低壓側數據處理系統,并且為高壓側采集器提供能源。主要包括以下三種功能(The combiner is the processing system for the low-voltage data and provides energy source for the collector of the high-voltage side. It mainly includes the following three functions):
(a) 接收來自多達9路采集器的采樣光信號,匯總之后按照IEC-61850規約以光信號形式對外提供采集數據(Receiving the sampling optical signal of collectors from 9 locations; Provide the colleted data to the external side in the form of optical signal according to regulation of IEC-61850 after the signal is aggregated.);
(b) 以光能量的形式,為采集器提供工作能源(Provide the working energy to the collector in the form of light energy.);
(c) 接收來自站級或繼電保護裝置的同步光信號,實現采集器間的采樣同步功能(Receive the synchronous optical signal for the station level or the protective relaying device to realize the synchronous sampling function among collectors.);
2、合并器主要結構(Main structure of combiner)
本裝置由以下模件構成:電源模件(POWER),數據處理模件(CPU),母板模件(MOTHER),交流變換模件(AC),激光電源模件(LASER),面板模件(PANEL)。
The device consists of the following modules: power module (POWER),data processing module (CPU), mother board module (MOTHER),alternate current conversion module (AC), laser power module (LASER) and panel module (PANEL).
合并器主要用于接收采集器的數字信號以及來自電磁式互感器的模擬信號,對這些信號合并理后以光信號方式對外提供數據。本模件主要提供以下五種功能(The combiner is mainly used to receive the digital signal of the collectors and the analog signals from electromagnetic transformer and provides data in the form of optical signal after they are aggregated and treated. The module mainly provides the following five functions):
(a) 接收并處理多達9路的采集器模件傳來的數據。合并器的A/D采樣部分,可以采樣交流變換模件輸出的最大18路的模擬信號。(Receive and treat data sent by the collectors from more than 9 channels, the sampling part of A/D of combiner; sample and exchange and convert the analog signal output from maximum 18 channels by the modules.)
(b) 接收站端同步信號,同步各路A/D采樣,并且將采集器的同步信號輸出到激光電源模件。(Receive the synchronous signal of station terminal, make the A/D sampling from various channels synchronous and output the synchronous signal of collector to laser power module.)
(c) 接收站采集器的電源狀態。(The status of power supply of collector at the receiving station.)
(d) 合并處理所采集的數據后,以3路符合IEEE802.3規定的100base-Fx或10Base-FL方式對外提供數據采集信號。(Aggregate and treat the collected data and provide the data acquisition signal to the external side with three channels in the form of 100base-Fx or 10Base-FL that are in line with the regulation of IEEE802.3.)
(e) 合并器還有備用CPU,安裝相應保護模件后可擴展保護或測控等功能。(The combiner is equipped with CPU. It can expand the protection and measurement and supervision after the corresponding protective module is installed.)
四、外形及安裝尺寸圖(Outline drawing and dimensions of installation)